Kenwood KCA-BT100 - Manual (Page 9)

English | 9
Dialing by Using the Incoming Call
List
You can dial by using the incoming call list. Up to
ten phone numbers of the received calls are stored
recorded in the incoming call list.
1 Enter the incoming call list mode
Select the "IN" or "IN-CALL" display.
Refer to <Selecting the Dialing Mode> (page 7).
2 Select a name or phone number
Push the Control knob towards [FM] or [AM].
3 Make a call
Press the Control knob ([ 38]) for at least 1
second.
"CALL" or "Call" is displayed.
• The incoming call list is the list of calls received at this
unit. It is not the one stored in the cell-phone memory.
• On the control unit that displays three rows, the phone
number in the middle row is the selected one.
• Depending on the type of your control unit, "0" is
displayed for the tenth call in the incoming call list.
• Depending on the type of your cell-phone, "+" mark
(International call mark) will not be transferred. In this
case, the incoming call list cannot be used for making a
call.
Functions of the buttons
[SRC] button*
During a call: End the call.
[VOL] buttons*
During a call: Adjusts the voice volume.
[ ] button
Enters the dialing method selection mode.
When a call comes in: Answers the call.
[ 38] button*
During a call:
Switches between the private talk mode and the
hands-free talk mode.
In dialing method selection mode:
Selects a dialing method.
[ ¢] button*
Number dial input: Inputs "+".
[ 4] button*
Number dial input:
Clears the entered phone number.
[FM] button*
Number dial input: Inputs "#".
[AM] button*
Number dial input: Inputs "*".
[0] – [9] buttons*
Number dial input: Inputs a digit.
[DIRECT] button*
Makes a call.
Remote Control Mode selector switch
Switch to "AUD" when dialing.
• * If your remote controller has a mode selection switch, set
it to "AUD".
• Remote controllers with the [ ] button and/or numeric
buttons are available optionally. Purchase a remote
controller with a desired function.
Remote Control (For Audio receiver)
2 Select a name or phone number
Push the Control knob towards [FM] or [AM].
3 Make a call
Press the Control knob ([ 38]) for at least 1
second.
"CALL" or "Call" is displayed.
• The outgoing call list is the list of calls originated from
this unit. It is not the one stored in the cell-phone
memory.
• On the control unit that displays three rows, the phone
number in the middle row is the selected one.
• Depending on the type of your control unit, "0" is
displayed for the tenth call in the outgoing call list.