Kathrein UFD 574/S - Manual (Page 14)

Initiation
14
Initiation with BZD 30 indoor Antenna
1. Switch on both the TV set and the receiver.
- Press

(Stand-by) on the remote control to switch the re-
ceiver to operational mode (LED flashes green).
2. Switch the TV set to AV mode, unless it switches automatically.
3. In order to activate the voltage supply of the antenna, carry out
the following steps with the remote control of the receiver:
- Press

 to enter the main menu.
- Select the sub-menu 'installation' with

and confirm
your entry with

.
- Now select 'net. configuration' with

. Press

to con-
firm your entry.
-
Press

once again to call up 'operation'
- Now change the selection for the supply voltage from 'OFF'
to 'ON' by pressing

(see photo).
- Now the antenna is energised with 5 V.
- Press  four times to get back to the TV mode.