Kathrein UFD 574/S - Manual (Page 22)

Timer Settings
22
Timer Settings
You can programme a timer to be able to timely record a programme.
14 timers are available, which you can set to different channels as well
as starting times and ends of programmes.
Call up the timer settings by pressing

, then use the keys

to
scroll the selection cursor to 'system parameters', now press

and
use the keys

to scroll to local time/timer and confirm with

.
The following is now displayed:
Use the keys

to scroll the selection cursor to the appropriate
timer and confirm your selection with

. Press

to exit the timer
again.
Incorrect time settings are rejected.
You can select and set
• the kind of programme (TV, radio or On Air Download)
• the programme position with the programme name
• the starting time (day, month, year, hour, minute)
• the end of the programme
• the timer status no/once/daily/weekly
for 14 timers. Leading zeros must imperatively be entered for the time
settings.
Carry out each setting with the keys

or

and the number keys.
As the current time automatically appears when the starting time of
the programme you wish to record is to be entered, you have to
re-enter the correct starting time. Unless otherwise entered, the
recording is automatically finished one hour after the start of the
recording on the same day.