Kyocera Koi - Manual (Page 55)

User Guide for the Kyocera Koi Phone 49
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Note: You must first establish a second phone line
with your service provider. Once established, a
second phone number becomes available in the
menu for selection:
1. Select Menu
→
Settings
→
Network
→
Set Phone Line .
2. Select one of the two lines and press .
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1. Select Menu
→
Settings
→
Accessories
→
Com Port Speed .
2. Select the speed. The options are: 19.2 kbps ,
115.2 kbps (default), 230.4 kbps .
Note: There may be a higher charge for making
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while the
phone is in data/fax mode. To receive data or faxes,
you must connect the phone to a laptop or PC and
switch the phone from voice mode to data/fax mode.
Note: To purchase a cable call (800) 349-4188
(U.S.A. only), (858) 882-1410, or visit
www.kyocera-wireless.com/store .
1. Connect the phone to the laptop or PC.
2. Set the Com speed.
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls .
4. Press to select an option:
– Voice only— Allow only voice calls.
– Fax, next call or Data, next call— Set the
phone to fax mode or data mode for the next
incoming call or the next 10 minutes.
– Fax, until off or Data, until off— Force the
phone into fax mode or data mode until the
phone is turned off.
Note: You cannot receive voice calls while the
phone is in data/fax mode.