Kenwood TK-5310 - Manual (Page 17)

9
i
nStAlling the
c
Ap over the
u
niverSAl
c
onnector
1 If you are not using an
optional speaker/ microphone
or headset, install the cap
over the universal connector.
2 Secure the cap in place using
the attached screw.
Universal
connector cap
i
nStAlling the
(o
ptionAl
) S
peAker
/ m
icrophone or
h
eAdSet
Optional
speaker/ microphone
1 Insert the guide of the
speaker/ microphone or
headset connector into
the groove of the universal
connector.
2 Secure the connector in place
using the attached screw.
Note: When not using an optional
speaker/ microphone or headset,
install the cap over the universal
connector.