Kenwood TK-5310 - Manual (Page 29)

2
■
Making Group Calls (P25)
Channels programmed for Conventional P25 and Trunking
P25 operation already have a Group ID assigned. For
these channels, simply press and hold the PTT switch to
make the call.
• On Trunking channels, if the traffic channel is busy, a busy
message appears and the busy tone sounds. Release the
PTT switch and wait for the channel to become free. When the
traffic channel becomes free, a proceed tone sounds.
Otherwise, on K2/K3/K5/K6/K7 model transceivers, if a key
has been programmed with Talkgroup (Conventional P25
only), you can select a group ID from the list to make a call
to those parties. To select a group ID:
1 Press the key programmed as Talkgroup.
2 Press the Side 2 and Side 3 keys or the <C and D>
keys to select a group ID/name from the list that has
been pre-entered into your transceiver.
• The target group ID/name appears on the display.
3 Press the Side 1 key to set the selected group ID.
4 Press and hold the PTT switch to make the call. Speak
into the transceiver as you would during a normal
transmission.