Kompernass KH 1106 - Manual (Page 13)

- 11 -
Interrupting processes (Cancel/Stop)
You can stop a process, interrupt it and then conti-
nue.
Interrupting the cooking process
Press button
i „Cancel/Stop“ once to interrupt
a cooking process. The appliance interrupts the coo-
king process and stops the remaining time.
Press button
s „Start/quick start“, to continue the
cooking process.
Abort the cooking process
Press button
i „Cancel/Stop“ twice to abort a
cooking process. The appliance switches back to
standby mode.
Prolong/shorten the cooking time
To increase/decrease the cooking time during
cooking, turn the dial
a :
• turn clockwise and the cooking time is increa-
sed by one minute.
• turn anti-clockwise and the cooking time is de-
creased by one minute.
In order to increase the cooking time by 30 seconds
at a time, press button
s „Start/quick start“.
Note: In standby mode and during defrosting,
the time cannot be altered by means of the
dial.
Quick start function
With this function you can immediately for 30 se-
conds (or longer, up to 95 minutes) begin cooking
at 100 % power.
•
Press button s „Start/quick start“. In the LED
display the symbols for microwave operation
and cooking flash . The count down
begins.
Memory function
Use the memory function, if you wish to carry out
3 processes after one another. If you choose several
operations and one of them includes defrosting, de-
frosting must be set as the first in the sequence.
After finishing a process, the acoustic signal sounds
once, then the next process immediately starts
Example
You require 300 watts for 15 minutes.
Use microwave power for defrosting + 10 minutes
at 600 watts microwave power for cooking +
10 minutes grilling for the preparation of food.
1. Press button p „Memory“ once. „3-1“ is
displayed in the LED display.
2. Press button o „Microwave“ six time to set
300 watts power for defrosting. „P300“ is
displayed in the LED display.
3. Turn the dial a to set the cooking time (durati-
on). Set 15:00 at 300 w power.
4. Press button p „Memory“ once again. Now
„3-2“ is displayed in the LED display.
5. Press button o „Microwave“ three times, to set
600 watts power. „P600“ is displayed in the
LED display.
6. Turn the dial a to set the cooking time (durati-
on: 10:00) at 600 w power.
7. Press button p „Memory“. „3-3“ is displayed
in the LED display.
8. Press button z „Grill/Combi“ once to set the
grilling function. „G-1“ is displayed in the LED
display.
9. Turn the dial a to set the grilling time (durati-
on: 10:00).
10. Press button s „Start/quick start“, to activate
the pre-setting function.
Selecting pre-settings
With this program you can pre-program a certain
starting time for cooking or grilling food.
If you have correctly adjusted the settings, the
appliance will automatically start at the set time.
IB_KH1106_E23715_GB 14.07.2008 14:03 Uhr Seite 11