Kompernass KH 1106 - Manual (Page 17)

- 15 -
– five times to defrost vegetables („dEF5“ ap-
pears in the LED display),
– six times to defrost cooked meats („dEF6“
appears in the LED display).
The red symbols for microwave operation
and defrosting
also appear on the LED
display.
2. Using the dial a to enter the weight of the
food to be defrosted in grams (the LED display
shows
). You can set the following weight
ranges for the various foods:
Meat:
100 to 2300 g
Poultry: 100 to 4000 g
Fish: 100 to 1000 g
Pizza: 150 to 900 g
Vegetables: 100 to 600 g
Sausage:
100 to 500 g
3. To start the defrosting process by weight, plea-
se press button
s „Start/ quick start“. In the
LED display the symbols for microwave operati-
on
and defrosting flash . The calcula-
ted time counts backwards.
Note: With some foods, such as meat, poultry,
fish, vegetables and sausage, it is necessary
to turn the food after a while. The acoustic
signal sounds twice and „turn“ appears on
the display, to remind you to turn the food.
1. Press „Cancel/Stop“ button i then open
the door and turn the food.
2. Close the door and press button s
„Start/quick start“.
The defrosting process is continued.
Note: If you wish to carry on without turning,
wait for a while after the acoustic signal. The
microwave automatically continues its program.
We recommend that you turn the food. This en-
sures even defrosting.
Defrosting by time
1. Press button f „Defrosting“. The red symbols
for microwave operation and defrosting
also appear on the LED display.
2. Turn the dial a to set the defrosting time:
The maximum possible defrosting time is 95 mi-
nutes.
3. Press button s „Start/quick start“, to start
the defrosting process. In the LED display the
symbols of microwave operation
and
defrosting flash . The calculated time
counts backwards
Query functions
Query the time during operation
During the cooking process, press button
d „Clock“.
The time appears on the LED display for 2– 3 se-
conds.
Query the power level operation
During the cooking process, press button
o „Micro-
wave“. The activated power level appears on the
display for 2– 3 seconds.
Child protection system
Activate this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the appliance.
The symbol for the child protection system
ap-
pears on the LED display, and the appliance cannot
be put into operation as long as this function is acti-
ve.
Setting the child protection system
Keep button
i „Delete/Stop“ for 3 seconds. At first
an acoustic signal sounds, then the symbol for the
child protection system
appears on the LED
display.
Deactivating the child protection system
Keep button
i „Delete/Stop“ pressed again for
3 seconds, until an acoustic signal sounds and the
symbol for the child protection system
goes
out.
IB_KH1106_E23715_GB 14.07.2008 14:04 Uhr Seite 15