Keys Fitness Power System KF-2060 - Manual (Page 23)

Assembly
23
Step 9
Attach Leg Extension Lever (20) to Seat Pad Support Receptacle (6) and secure using Shaft
(86), one Washer (117), one Spring Washer (118), and one Allen Bolt (98).
Slide Foam Frame w/ Shaft (26) through the Leg Extension Lever (20) and attach Foam
Frame w/o Shaft (25) to the other side. Insert Slip Tension Pin (85) through the hole where
the two foam frames meet.
Note: You may need to use a rubber mallet to install Slip Tension Pin (85).
Figure 9