Keys Fitness Power System KF-2060 - Manual (Page 24)

Assembly
24
Step 10
Align Press Arm (35) and Chest Press Cam (12) while inserting Press Station Shaft (38). Slide
Pillow Block Bearing (75) onto each side of Press Station Shaft (38) and secure the assembly
using two Chrome Washers (101), two Washers (143), two Spring Washers (119), and two Allen
Bolts (128).
Attach the entire assembly to Press Arm Support using four Nuts (126), eight Washers (125),
and four Bolts (130).
Figure 10