Keys Fitness Power System KF-2060 - Manual (Page 32)

Assembly
32
Step 18
Note: Stretch all cables out completely and make sure all twisting is removed before
installing.
Install Lat Cable (110) as detailed in Figure 18. Follow dotted lines to identify exact location
of pulleys. See Page 43 “Cable View” for more detail.
Start by threading cable end into Top Plate (55).
You will need the following for installation:
Pulley (57) - Qty. 7
Cable (110) - Qty. 1
Nut (144) - Qty. 7
Long Pulley Spacer (123) - Qty. 4
Longer Pulley Spacer (121) - Qty. 4
Washer (143) - Qty. 14
Figure 18
Bolt (134) - Qty. 2
Bolt (135) - Qty. 1
Bolt (136) - Qty. 1
Bolt (137) - Qty. 1
Bolt (141) - Qty. 2