Battery installation, Remote controller mode switch – Kenwood CarPortal KOS-V1000 User Manual

Page 11

Advertising
background image

English 11

Next page

3

¤

• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation

could result, if the Remote Controller falls down and gets wedged under the pedals while driving.

• Do not place the battery near an open flame or heat source. This may cause the battery to explode.

• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak

fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a

physician.

Battery installation

Use two "AAA"/"R03"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles
aligned properly, following the illustration
inside the case.

• If the Remote Controller operates only over shorter

distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace
the both batteries with new ones.

Remote Controller mode switch

The functions operated from the remote
controller differ depending on the position of
the mode switch.

N

DIO RETURN

DVD

T V

NAVI

AUD

POSITION

O

CANCEL

DVD mode
Switch to this mode when
playing DVD player unit.

AUD mode
Switch to this mode when
controlling a selected source
or a CD changer etc.

NAVI mode
This is switched when
controlling Navigation unit.

TV mode
This is switched when
controlling TV.

• The position of the remote control mode switch is

indicated in the title of each mode, e.g., "(AUD mode)".

• When controlling a player that is not integrated in the

unit, select "AUD" mode.

Advertising