Kenwood CarPortal KOS-V1000 - Manual (Page 82)

82 KOS-V1000
PRK SW
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
A
FUSE ( 5A )
Ground wire (Black)
Connector A
Connector B
Wiring harness
(Accessory
2)
Accessory !
(ISO–JASO)
Antenna Cord
(ISO)
FM/AM antenna input
For the sake of safety, be sure to connect the parking sensor.
Connect to the vehicle's parking brake
detection switch harness
using the supplied relay connector.
Battery wire (Yellow)
Ignition wire (Red)
Steering remote control input (Light Blue/Yellow)
To steering remote
If no connections are made, do not let the cable come out from the tab.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Mute wire (Brown)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Power control/ Motor antenna control wire
(Blue/White)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
External amplifier control wire (Pink/Black)
To car light control switch
Dimmer control wire (Orange/White)
To vehicle's reverse lamp harness
Reverse sensor wire (Purple/White)
Accessory 4
Parking sensor wire (Light Green)
FUSE ( 15A )
Battery wire (Yellow)
Battery wire
(Yellow)
Ignition wire (Red)
Connection
Antenna cord is used when
receiving a radio station with
the built-in tuner.
In this case, set "TUNER
source" in <System Setup>
(page 58) to "On".