Printing file print, Prerequisites, Printing file print -12 – Kodak RP 30 User Manual
Page 156: Prerequisites -12
Operator’s Guide
Printing File Print
Prerequisites
•
The RP 30 Laser Printer only accepts jpg, bmp and uncompressed tif file formats.
Save any files created with Adobe Photoshop to one of these formats.
•
Digital cameras have Gamma values between 1.8 and 2.2. The RP 30 Laser
Printer prints with a Gamma of 1.8.
•
The maximum single file size is 110 MB (tif, bmp, jpg unpacked). Larger files will
not print.
•
Adjust the print size to the aspect ratio of the image (indicated by .... x .... pixels).
For extreme deviations, which the program can no longer process, the system
displays the error message File print parameter range violated.
•
Types of image/paper adjustment:
−
Fit image to paper
−
Fill print size
•
The quality of the prints depends on the relationship between resolution and print
size. The minimum acceptable resolution is approximately 100 pixels per cm (200
pixels per inch).
IMPORTANT: For images created with Adobe Photoshop:
•
Save files in tif, bmp, or jpg formats.
•
Use a Gamma value of 1.8.
•
Convert CMYK (additive colors) to RGB (subtractive).
6-12
KODAK PROFESSIONAL RP 30 Laser Printer