Kodak RP 30 - Manual (Page 94)

Settings
Installing the Software
1. Touch:
• Settings
• Machine settings
• Install software
2. Touch Load CD.
3. Touch Install.
Check if the settings were saved on an external data carrier.
If No, the operation is stopped.
If Yes, the input screen opens. Enter the serial number.
The software is installed and enabled. Then a new start is enforced.
4. Update the system software.
If the system does not function correctly afterwards, restore the status before the
update with the previous version.
KODAK PROFESSIONAL RP 30 Laser Printer 4-27