Kyocera KM-C3130 - Manual (Page 60)

1 1.6 Tiling Copies (“Image Repeat” Function)
1-32
A
u
x
ili
ar
y
F
unc
ti
ons
C
hap
ter
1
1.6 Tiling Copies (“Image Repeat” Function)
Multiple copies of the original can be printed at the desired zoom ratio to fill the
page.
The zoom ratio is specified in the Basic screen. In addition, the number of times that
the copy is repeated is calculated based on the Zoom and Paper settings specified
in the Basic screen and the original size and repeating arrangement specified in the
Image Repeat screen.
To make settings for the “Image Repeat” function
1
Position the document(s) to be copied.
❍ For more details, refer to “Feeding the Document” of chapter 4 “Original
Documents” in the Basic Operations volume.
2 Select the desired Color setting.
❍ For more details, refer to “Selecting the Color Setting” of chapter 5
“Specifying Copy Settings” in the Basic Operations volume.
3
Specify the desired Paper and Zoom settings.
❍ For more details, refer to “Selecting the Paper Setting” and “Specifying a
Zoom Setting” in the Basic Operations volume.
4 Touch [Auxiliary].
The Auxiliary screen appears.
5 Touch [Image Repeat].
6 Select either [Multi-Full Original] or
[Multi-Original].
❍ To reduce the image so that it
fits within the allowable print
area for the paper (inside the
area within the margins), touch
[Multi-Full Original].
❍ To make copies so that the
paper is filled regardless of the
margins, touch [Multi-Original]. In this case, the margins are reduced by the
image at the edge of the paper.