Kyocera KM-C3130 - Manual (Page 73)

2.1 Available Scanning Features 2
2-3
S
c
a
n
n
ing
O
p
er
at
io
n
s
Cha
p
te
r 2
Operation Description
For more details on functions and operating procedures, refer to the manual for the
printer controller.
1 Press the [Scan] key.
The Destination screen appears.
✎
Note
If the printer controller is not installed, the Destination screen does not ap-
pear when the [Scan] key is pressed, and the copier does not enter Scan
mode.
2 Specify the appropriate settings.
❍ Specify the recipient (where
the scan data will be sent) and
the scanning mode, and then
specify any other necessary
settings.
3 Press the [Start] key to start scanning and sending the data as
specified.