Kyocera KM-C3130 - Manual (Page 62)

1 1.7 Inserting Pages Between Copies of Transparencies (“OHP Interleaving” Function)
1-34
A
u
x
ili
ar
y
F
unc
ti
ons
C
hap
ter
1
1.7 Inserting Pages Between Copies of Transparencies
(“OHP Interleaving” Function)
After each overhead transparency is copied, a page from a different paper source
can be added to the stack of transparencies as an overleaf. In order to use this func-
tion, the overhead transparencies should be loaded into the multipurpose paper
drawer (1st drawer).
✎
Tip
We recommend that interleaf paper (inserted paper) with the same size as the
overhead transparencies first be loaded into any drawer other than the multipur-
pose paper drawer (1st drawer) with the same orientation as the overhead
transparencies.
To make settings for the “OHP Interleaving” function
1 Position the document(s) to be copied.
❍ For more details, refer to “Feeding the Document” of chapter 4 “Original
Documents” in the Basic Operations volume.
2 Select the desired Color setting.
❍ For more details, refer to “Selecting the Color Setting” of chapter 5
“Specifying Copy Settings” in the Basic Operations volume.
3 Touch [Auxiliary].
The Auxiliary screen appears.
4 Touch [OHP Interleaving].
5
Select the drawer loaded with the
interleaves, and then touch
[Enter].