Kentrox AI232 - Manual (Page 130)

AI232 Version 9.6x User’s Guide
TID Multiplexing: Overview
6-2
Overview
AI232 supports TID multiplexing, which enables a single call from an OSS to fan out
into multiple calls to various NEs. The initiating call may be asynchronous or TCP, but
cannot originate from a destination menu. Refer to
Figure 6-1 for an illustration of TID
multiplexing.
Figure 6-1 TID Multiplexing Overview
In Figure 6-1 , AI232 takes a single call from an OSS and routes TL1 commands to
various NEs by means of the TID in the TL1 command. Similarly, AI232 receives TL1
responses and NE reporting messages from several NEs and routes these messages
to the appropriate OSS. The call to AI232 from the OSS is a parent call. The calls
from AI232 to the various NEs are children calls.
After receiving a TL1 command from the OSS, AI232 checks to see if there is an
existing connection for each TID. If a connection to the appropriate NE is already
established, then AI232 forwards the TL1 command to the NE as specified by the TID.
The following characteristics apply to AI232 when it attempts to connect to an NE:
z If AI232 is unable to establish a connection to an NE, it will buffer the TL1
command and try to reconnect within 2 seconds.
z AI232 tries to connect up to three times if it cannot immediately establish a
connection.
z AI232 buffers only one TL1 command for each NE. If a connection is made, AI232
forwards the buffered command to the NE.
NEs
TID4
TID5 TID6
NEs
Network
OSS
TID2
TID3
AI232
TID1
TID1
TID2
TID3
TID4
TID5
TID6
TID1
TID2
TID3
TID4
TID5
TID6