Kentrox AI232 - Manual (Page 175)

AI232 Version 9.6x User’s Guide
AI232 Commands: Commands Overview
8-3
5. At the login prompt, enter your user name.
6. At the password prompt, enter your password.

Notes: ai is the default user name and password. AI232 allows only five logins
using the default password. On the sixth login, AI232 will prompt you to
change the default password to a new password.

Keep a copy of your username and password in a safe place. If you lose
or forget your password on AI232 in standalone mode, you must call AI
customer service for assistance in gaining access to the card.
The destination menu appears.
7. Enter ai .
Establishing a Remote Shell Connection
Establish a remote shell connection to AI232 using AI198 command telnet or using
another Telnet client. To establish a Telnet session:
1. Use a PC or laptop with terminal emulation software such as HyperTerminal to
connect to AI232. For information on operating your particular terminal emulation
software, refer to the documentation provided with the program.
2. For user name, enter ai .
3. For password, enter ai . The destination menu appears.
4. For destination, enter ai . The [232] prompt appears.
winslc Commands
The winslc commands let the user communicate with AI232 from AI198. Use these
commands to enter data, diagnose problems, and retrieve information from AI232.
Displaying winslc Command Logging
To monitor winslc commands, press CTRL+l when logged into AI198 to turn on
logging.