Kentrox AI232 - Manual (Page 258)

AI232 Version 9.6x User’s Guide
AI232 Commands: sholog
8-86
sholog
Description
This command displays the contents of the log file. The last 32,000 characters of log
messages that were sent to the log port are displayed.

Note: This command has the same functionality as command show log .
Command Type
shell
Formats
sholog -p
Parameters
Examples
This example displays the contents of an AI232 log file one page at a time.
-p Displays the content of the file one page at a time.

Note: This option is not available with command show log .
[232]sholog -p
:26 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) DISCONNECT -> INITIALIZE
09:01:26 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) INITIALIZE -> SERIALCONN
09:01:27 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) SERIALCONN -> ESTABLISH
09:01:57 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) ESTABLISH -> DEAD
09:01:57 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) DEAD -> DISCONNECT
09:01:57 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) DISCONNECT -> INITIALIZE
09:01:57 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) INITIALIZE -> SERIALCONN
09:01:58 072304 Sev=F Msg:
PPPD Phase Change: (Link 4) SERIALCONN -> ESTABLISH
Press Space for more or q to quit: