Kyocera Mako S4000 - Manual (Page 33)

User Guide 25
7 M
ESSAGING
This chapter describes how to send, receive, and
erase messages from your phone. For information
on voicemail messages, see “Voicemail” on
page 11.
Note: The features and menus described in this
chapter may vary depending on services available
in your area. Check with your service provider for
details and possible usage charges.
Text messages
You can only send text messages to phones
capable of receiving them.
Create a text message
1. Select Menu > Messaging > New Text Msg .
2. At the Send To field, enter a recipient’s
phone number by either:
– Select
Options > Recent List ,
Recent Calls , Contacts or Groups to
access your stored contacts.
– Enter a new address manually. See “Text
Entry” on page 13.
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses. If you select stored contacts, this
is done automatically. Scroll down to move
to the next field when done.
3. At the Message field, enter the message.
4. Select Send .
Include QuickText and other extras
During text entry, you can insert prewritten text
(QuickText), symbols, or contacts.
1.
From the text entry screen, select Options
and one of the following:
–
Insert QuickText inserts prewritten text
from a list.
– Add Symbol inserts a symbol.
Press the corresponding number to
select a symbol.
2. Complete your message.
3. Select Send .
Use text message options
When you are ready to send a text message, you
have several options for how and when you want
it received.
1.
After composing your message, select
Options and one of the following:
– Save Message saves the message to the
Drafts folder.
– Save QuickText saves your composed
message as a prewritten message.
– Settings > Msg Receipt > Request
alerts you when a recipient has received
your message.
– Settings > Set Priority > Normal or
Urgent sets the message priority.
82-K6563-1EN.book Page 25 Monday, March 17, 2008 8:33 PM