Kyocera Mako S4000 - Manual (Page 55)

User Guide 47
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page 46.
Voice answer
You can use your voice to answer a call when
using a hands-free accessory.
Enable voice answer
Select Menu > Settings > Voice Features >
Voice Answer > With Accessory to enable
answering calls with an accessory.
Note: To use the voice answer feature, you must
have the
Auto-Answer feature disabled (see
“Auto answer” on page 47), the Out of headset
option selected (see “Headset sounds” on
page 47), and the phone set to
Normal Sounds
(see “Ringer mode” on page 40).
Use voice answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. If the caller is
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?”. Say “Yes” to answer or “No” to silence
the alert without answering.
Expert mode
The expert mode enables you to speak the
command after you hear a tone instead of
speaking a command following the initial voice
prompts. Select
Menu > Settings >
Voice Features > Expert Mode and one of
the following:
•
Normal sets phone to default voice prompts.
• Expert sets phone to sound tones instead of
voice prompts.
Accessories
This section describes settings that affect
accessories you use with your phone.
Headset sounds
With a headset attached to your phone, you
can play the ringer through the headset or
phone speaker.
Select
Menu > Settings > Accessories >
Headset Sounds and one of the following.
• Out of phone rings from the phone speaker.
• Out of headset rings from the headset.
Auto answer
With a headset or hands-free kit attached to
your phone, you can set the phone to
answer automatically.
Select
Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds . The phone
automatically answers after 5 seconds.
82-K6563-1EN.book Page 47 Monday, March 17, 2008 8:33 PM