Global mode, User ge memory protect, Midi clock – KORG KARMA 2 User Manual

Page 23: Rt (realtime command), S/s out p/c (start/stop out p/c), User ge memory protect midi clock rt, Realtime command), S/s out p/c, Start/stop out p/c)

Advertising
background image

22

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345

Global mode

RT

(Realtime Command)

An “RT (Realtime Command)” check box has been added
to GLOBAL 2.1-1a: MIDI Setup (

☞PG p.137).

RT (RealTime Command)

[Off, On]

Off (unchecked):

MIDI common messages and realtime

messages (song position pointer, start, continue, stop) will
not be received from the MIDI IN connector when “MIDI
Clock” is set to External or Auto. (Song select messages
will be received.)

Turn this Off if the song settings of KARMA music
workstation are being unintentionally reset by
messages from an external MIDI sequencer. You can
use this so that the KARMA music workstation ignores
the MIDI Start and Stop commands of an external
sequencer, yet still responds to MIDI Clock while in
external sync mode.

S/S Out P/C

(Start/Stop Out P/C)

A new parameter “S/S Out P/C (Start/Stop Out P/C)” has
been added to GLOBAL 2.1-1b: MIDI Filter (

☞PG p.138).

S/S Out P/C (Start/Stop Out P/C)

[Off, On]

In Program and Combination modes, this function
transmits a MIDI start message when you trigger the
KARMA function, and a MIDI stop message when you turn
it off. This lets you make an external MIDI sequencer or
rhythm/groove machine start playing at the moment that
the KARMA function begins playing.

Off (unchecked):

MIDI “Start” and “Stop” messages will

not be sent in Program and Combination mode. Normally
you will leave this Off (unchecked) when not slaving
external devices.

On (checked):

MIDI system realtime messages “Start” and

Stop” will be transmitted in Program and Combination
mode. If “MIDI Clock” (PG 2.1-1a

☞PG p.137, ☞p.22) is set

to Internal or Auto (and operating as Internal), the start
and stop messages will be transmitted under the conditions
described below. This can be used to simultaneously start
an external MIDI sequencer or rhythm/groove machine at
the moment the KARMA function begins playing.

Start:

If the [KARMA ON/OFF] key is on, the MIDI system

realtime message “Start” will be transmitted at the moment
you use the keyboard or CHORD TRIGGER 1–4 keys to
trigger the GE selected for a KARMA module.

Start” will be transmitted at the moment that the GE
phrase or pattern is triggered according to the
“KARMA Key Zone” (Program, Combination 6.1-2a)
setting for that KARMA module.

User GE Memory Protect

A protect setting for user GE memory has been added to
Memory Protect (1.1-2b

☞PG p.136) in the GLOBAL 1.1-2:

Pref. (System Preference) page.

User GE (KARMA User GE)

[Off, On]

Protects the user GE memory in internal memory.

On (checked):

The internal user GE memory will be

protected, and the following writing operations will not be
permitted.
• Receiving user GE data via MIDI data dump
• Loading user GE data from disk

Off (unchecked):

You will be able to write to internal user

GE memory.

MIDI Clock

The GLOBAL 2.1-1a: MIDI Setup (

☞PG p.137) “MIDI

Clock” parameter now has an additional setting of Auto.

MIDI Clock

[Internal, External, Auto]

Auto:

Operation will normally be the same as Internal.

With the Auto setting, operation will automatically switch
to the equivalent of the External setting when MIDI clock
messages are received from an external MIDI device
connected to the MIDI IN connector.

For details on the Internal and External settings, refer to
☞PG p.137.

You can use this to keep the KARMA in external sync
mode while working with an external sequencer, yet still
be able to start and play the KARMA function while the
external sequencer is not running or sending MIDI clock.

If no further MIDI clock message is received within
500 ms after receiving a MIDI clock, start, or continue
message from MIDI IN, or if you start the KARMA
music workstation by operating the front panel,
operation will switch to the equivalent of Internal.

Advertising