KORG KARMA 2 - Manual (Page 24)

23
Global mode
Stop: If “Start“ has been previously transmitted, the MIDI
system realtime message “Stop” will be transmitted at the
moment you turn off the [KARMA ON/OFF] key.
MIDI OUT
KARMA Music Workstation
EM-1
MIDI IN
“MIDI Clock”: Internal
“S/S Out P/C”: On
Clock: Ext
EM-1
TAP
1 2 5 7 10 12 14 16 15 13 11 9 8 4 3
☞ PG p.245 “Connecting MIDI devices/computers (MIDI
connectors),” PG p.253 “Synchronizing the playback of
the KARMA function or sequencer,” BG p.88 “Synchro-
nizing the KARMA function”
Dump User GE
In conjunction with the newly added 320 rewritable user
GEs, the KARMA music workstation now supports MIDI
dumps of user GE data. A “Dump User GE” command has
been added to the utility menu commands of the GLOBAL
2.1-1 page. (
☞PG p.139)
Dump User GE
User GE [Bank, Single, User Template]
Selects the user GE(s) that you want to dump.
Bank: One bank of GEs (32) will be dumped. Move the
cursor to the field below, and select the bank that you want
to dump, from the range of Bank U-A to Bank U-J.
Single: One GE will be dumped. Move the cursor to the
field below, and select the GE that you want to dump, from
the range of GE numbers 1190 (U-A)–1509 (U-J).
User Template: Dump the User Template data used by the
User GEs.
Time required for dumping user GE data
Type of data dumped Data size (kbytes) Time required (seconds)
KARMA EXB KARMA EXB
music -MOSS music -MOSS
workstation installed workstation installed
GE single (a) 2.4 ← 0.7 ←
GE bank (a) 77.9 ← 24.2 ←
Template 68.0 ← 21.2 ←
Time required for writing to user GE dump memory
Type of data dumped Processing time to memory
GE single (a) approx. 1 second
GE bank (a) approx. 1 second
Template approx. 1 second
User GE data is not included in Dump All.
Foot SW Assign
The following settings have been added to “Foot SW
Assign” in the GLOBAL 6.1-1: Foot page (
☞PG p.145).
Foot SW Assign [Off…KARMA Chord Trigger 4]
If you select a function that includes a CC#, that MIDI
control message will be transmitted each time the foot
switch is turned on or off. (Off: 0, On: 127)
Tap Tempo: In Program, Combination, Sequencer, or Song
Play modes, you can use a foot switch to control tap tempo
for the KARMA function, sequencer, or SMF playback.
Control the tempo in realtime by pressing the connected
foot switch in time with the beat at the desired tempo.
You can use tap tempo control whenever the [TEMPO]
knob can be operated. For example if a song is playing in
Sequencer mode with “Tempo Mode” (
☞PG p.70) set to
Auto , it will not be possible to use tap tempo control.
JS+Y (CC#01), JS-Y (CC#02): The foot switch will control
the effect of the KARMA music workstation's joystick.
Turning the foot switch on will have the same result as
moving the joystick all the way in the +Y or -Y direction,
and turning the foot switch off will have the same result as
returning the joystick to the center.
Slider (CC#18): The foot switch will control the effect of the
KARMA music workstation’s [VALUE] slider. Turning the
foot switch on will have the same result as moving the
[VALUE] slider to the maximum, and turning it off, to the
minimum position.
Knob 1…4, SW1, SW2: The foot switch will control the
effect of the KARMA music workstation’s Knob 1–4 or SW
1/2. The MIDI control message assigned to “Knob 1…4 B-
Assign” or “SW 1/2 Assign” in each mode will be transmit-
ted when you turn the foot switch on/off.
KARMA RTC Knob 1…8, KARMA RTC SW 1/2, KARMA
Scene, KARMA Chord Trigger 1…4:
The foot switch will
control the effect of the knob or switch that controls the
KARMA function. The MIDI control message you assigned in
Global mode 6.1-2: KARMA 1.6.1-3: KARMA2 (
☞PG p.146)
will be transmitted when you turn the foot switch on/off.
Foot Pedal Assign
The following settings have been added to “Foot Pedal
Assign” in the GLOBAL 6.1-1: Foot page (
☞PG p.145).
If you select a function that includes a CC#, that MIDI
control message (1–127) will be transmitted when the
foot pedal is operated.
JS+Y (CC#01), JS-Y (CC#02): The foot pedal will control the
effect of the KARMA music workstation’s joystick.
Slider (CC#18): The foot pedal will control the effect of the
KARMA music workstation's [VALUE] slider.
Knob 1…4: The foot pedal will control the effect of the
KARMA music workstation’s Knob 1–4. The MIDI control
message assigned to “Knob 1…4 B-Assign” in each mode
will be transmitted when you operate the foot pedal.
KARMA RTC Knob 1…8: The foot pedal will control the
effect assigned to the KARMA RTC Knob 1–8. The MIDI
control message you assigned in “KARMA Realtime
Controls” of Global mode 6.1-2: KARMA 1 (
☞PG p.146)
will be transmitted when you operate the foot pedal.