Kathrein MSK 200/S2 - Manual (Page 12)

12
GENERAL OPERATION
To open the zoom window, press and hold your fi n-
ger on the marker; you can then shift it to the desired
position!
Press the “FUNCTION“ key, tap on the screen and
hold to drag the screen section as required (e.g.: the
delay time on the oscilloscope, the mid-frequency on
the spectrum analyser)!
This type of key indicates an option that is unavailable on this unit!
This type of key indicates a defective function in the unit!
Tap on this type of key to switch between two operating modes (e.g.: 22 kHz signal ON/
OFF)!
Press this key e.g. to print the screen display!