Kathrein MSK 200/S2 - Manual (Page 16)

16
FUNCTION OVERVIEW
Mains external AC power supply unit 100...240 V
Battery internal Li-Ion battery 12 V/6,5 AH
external battery supply vehicle 11 V...16 VDC
keyboard 12 hardkeys On/Off, Help, Prog.+, Prog.-,
Analyze, Source, OSD/Off, Vol.+,
Vol.-, Copy, Function, Extend
external keyboard ASCII keyboard (PS2) to enter ASCII characters
Touch Infra-red Touch Intuitive operation and ASCI
character entry
Ethernet
RS232
PCMCIA-Module analogue modem GSM modem
Analogue video TV-CATV TV terrestrial Satellite SCART/video
FTA digital video DVB-C
J83 B
DVB-T
ATSC
DVB-S TS-parallel/ASI
Scrambled digital
video DVB-C
J83 B
CI/CA
DVB-T
ATSC
CI/CA
DVB-S
CI/CA
TS-parallel/ASI
CI/CA
Display Position green signal red signal
operational mode/
standby Front
(using ON/OFF button)
In mains or external DC
operation
Battery operation
LNB supply Front
(using EXTEND button)
Voltage supply is on,
blinks if overloading is
greater than 0.6 A
external voltage is con-
nected
Note:
Switch to “standby” by pressing ON/OFF and then selecting the “suspend Mode”, or
by closing the display cover!
Display Position green signal yellow signals
Battery status rear panel green = charging 5 x each 20 % = Battery
status
OPERATION
OPERATION
REMOTE CONTROL
VIDEO DISPLAY
SIGNALLING