Kensington MP-20E - Manual (Page 17)

E-17
Personal Computer Input Connector
The personal computer input connector uses a 15-pin mini D-SUB type connector.
The pins and their corresponding signal inputs are described below.
Personal Computer Input Connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
NOTE: The RGB (15-pin) input connector of the projector is of the analog type. This cannot be connected with a digital
output type of personal computer.
Connections with the Personal Computer
y GND
u GND
i GND
o NC
!0 GND !1 NC
!2 SDA (DDC2B)
!3 H.SYNC
!4 V.SYNC
!5 SCL (DDC2B) q RED VIDEO
w GREEN VIDEO
e BLUE VIDEO
r GND
t NC
Connections with Personal Computers
NOTE:
• After connecting the MPC-VGA cable, please set the personal computer external output and screen display.
• When the settings of the external output have not been made, "No signal being input" will be displayed.
Connecting Macintosh Computers
• Attach the supplied (MPC-VGA) cable if when the monitor output is a VGA port (mini D-SUB 15-pin).
• An optional Apple video adapter cable is required when the monitor output is a video port or DVI port.
RGB signal cable MPC-VGA (Supplied item)
Audio cable with mini plugs (Commercially available)
MP-20E