Kensington MP-20E - Manual (Page 25)

E-25
Changing the Orientation of the Projection Image
Effective Only with OHP Input
This operation switches the (vertical/horizontal) orientation of the currently projected image.
The display of the switched screen is adjusted to match the width.
To view the portion that has been cut off
Operation with the Projector
Press the SCROLL ( ̆̄) buttons and scroll the projec-
tion image up or down.
Operation with the Remote Control
Press the SCROLL ( ̆̄) buttons and scroll the projec-
tion image up or down.
NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched
screen will be adjusted to match the width, the same as with regular changes of orientation.
Regular Operation
Operation with the Projector
Press the PORTRAIT button.
Operation with the Remote Control
Press the PORTRAIT button.
A B C
A
B
C
• Pressing the ZOOM (–) button permits display of a large portion within the read-
ing range of the vertical display. The undisplayed portion can be displayed with
the SCROLL ( ̆̄) buttons.