Kensington MP-20E - Manual (Page 22)

E-22
Adjustment of the Projection Image
Adjust the projection image to the screen.
Adjusting the Projection Image
• When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of the
projector lens.)
• When the image is shifted up or down, use the tilt foot to adjust the projector vertically.
• When the image is slanted, turn the left or right tilt foot to adjust.
• When there is keystone distortion of the image, adjust with "Keystone" of the menu operations. → See Pages E-32 and E-37.
Making Focus/Zoom Adjustments
Turn the focus ring/zoom lever of the projection lens and adjust the projection image.
Adjusting the Tilt (Slant)
Adjustment of the tilt foot allows the position and slant
of the projection image to be adjusted.
Press the left-right tilt adjustment lever and raise the
front of the projector. Release the lever when the de-
sired height has been reached. Rotating the lowest
portion of the tilt foot permits fine adjustments to be
made. The tilt foot are lengthened by rotated to the left
and shortened by rotated to the right.
• Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing
so could result in the projector slipping or falling over and could cause an accident or breakdown.
• When moving the projector, be sure to return the tilt foot to the original position.
• The air intake vents on the side of the projector draw in cooling air with a strong air current. When cloth
or paper adheres to and covers the air intake vents, the internal temperature rises and could cause an
accident or breakdown.
• Depending upon the material of the placement location, the rubber feet may soil on the placement
surface.
CAUTION
Right angle
Up Down