KORG PX3B - Manual (Page 30)

30
Edit mode
Here you can switch each effect on/off, select the
effect type, modify the parameter values, etc.
In Play mode, press the EDIT
® button to enter
Edit mode.To return to Play mode, press the EXIT
button.
1. Select the effect that you wish to edit
Use the EDIT
√
/ ® buttons to select the effect that
you wish to edit.
Each time you press an EDIT
√
/ ® buttons, you
will cycle through the effects in the order shown be-
low. When an effect is selected, its icon will blink.
2. Editing each effect
For each effect, you can select the effect type and
set its parameter values. Effects that are turned off
cannot be edited.
Effect OFF
To turn an effect on, use the EDIT
√
/ ® buttons to
select the effect, and press the BYPASS·TUNE
button. For details on effect types and their param-
eters, refer to the Effect Parameter List (
☞
p.36).
1) DYNA (dynamics)
These are dynamics-type effects such as compres-
sor, overdrive, and distortion, that are used mainly
to create the tone of the bass.
• BYPASS / TUNE button: Turn the effect on/off
• +/– buttons: Select the effect type
• Value dial: Set the value of the parameter