KORG PX3B - Manual (Page 32)

32
5) D/R (delay/reverb)
This provides spatial effects such as reverb and
delay.
• BYPASS·TUNE button: Turn the effect on/off
• +/– buttons: Select the effect type
• Value dial: Specify the effect level
6) NR (noise reduction)
Adjust the depth of noise reduction. Raising this val-
ue will produce more noise reduction. Normally you
will adjust this so that you do not hear obtrusive noise
when the strings are lightly muted.
• Value dial: Adjust the depth of noise reduction
It is not possible to turn noise reduction off.
If this value is raised excessively, the sound may
be cut off prematurely, depending on the de-
vice that is connected. If this occurs, reduce the
value.
7) LEVEL
Adjust the level for each program using the Value
dial. Depending on the effect settings, the output
may be distorted (clipped), so you should adjust
this so that distortion does not occur.
• Value dial: Select the level for each program
The volume of each program will change de-
pending on the bass you use. Adjust the level
appropriately for your bass.