Konica Minolta 7235 - Manual (Page 13)

I Outline Chapter 1 Summary of Network Functions
4
1-1. Network/Scanner Function Outline
Connection with the Network
Please connect the UTP cable (Category 5 recommended) connected to the network to the Ethernet connec-
tor (RJ-45) of the machine.
The settings required for connecting to the network depend on the environment of the network the machine is
connected to, the OS of the computers making up the network, etc. Make the settings required to match the
environment into which this system is being introduced.
Network Setting Method
There are two methods for specifying the machine’s network settings.
„ Setting from the copier control panel
Load the setting screen from the copier’s control panel and set the network functions.
z For the method setting the network functions from the copier’s control panel, refer to [Chapter 4 Setting from the
Control Panel] (
Page 21).
„ Setting using the Web Utilities
This sets the network controller from a computer connected to the network using the Web Utilities.
z For details on the Web Utilities, refer to [Chapter 5 Web Utility] ( Page 89).