Konica Minolta 7235 - Manual (Page 86)

77
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
4-14. LDAP Setup
This sets the information required for accessing the LDAP server to acquire E-mail addresses for [Scan to E-
Mail].
● If the LDAP Setup is not set up correctly, it could cause network problems. This setup process must be
performed only by the server's administrator.
1
Touch the [12.LDAP Setup] key on the [Network Setting] screen.
→ The [LDAP Setup] screen will be displayed.
z For details on the procedure for displaying the [Network Setting] screen, refer to [4-2.Method for Setting Network
from Control Panel] (
Page 23).
z For details on the setup procedure of LDAP, refer to the instruction manual of the LDAP server to be used.
Use [LDAP Setup] screen to access the following:
„ [LDAP Server Setup] screen 1/4
Enable LDAP Page 79
Maximum Hit Number Page 79
Search Timeout Page 79
Connect Chk Page 80
„ [LDAP Server Setup] screen 2/4
Server address Page 81
Search Root Page 81