Domain name – Konica Minolta 7235 User Manual
Page 94
Advertising
4-14. LDAP Setup
85
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
Domain name
Set the Domain name for accessing the LDAP server as required.
z
Usually entering the Domain name is not required.
z
When [GSS-SPNEGO] is specified for authentication type, input the domain name of the Active Directory.
1
Touch the [Domain name] key.
2
Enter the domain name on the [Data Input] screen.
3
Touch the [OK] key on the [Data Input] screen.
Advertising