Kenwood KDC-5047U - Manual (Page 14)

14 |
KDC-BT50U/ KDC-5047U/ KMR-440U
Tuner Operation
PTY (Program Type)
Selecting the Program Type below and searching
for a station;
Program Type Display
Speech “Speech”
Music “Music”
News “News”
Current Affairs “Affairs”
Information “Info”
Sport “Sport”
Education “Educate”
Drama “Drama”
Culture “Culture”
Science “Science”
Varied “Varied”
Pop Music “Pop M”
Rock Music “Rock M”
Easy Listening
Music
“Easy M”
Light Classical “Light M”
Program Type Display
Serious Classical “Classics”
Other Music “Other M”
Weather “Weather”
Finance “Finance”
Children’s programs “Children”
Social Affairs
“Social”
Religion “Religion”
Phone In “Phone In”
Travel “Travel”
Leisure “Leisure”
Jazz Music “Jazz”
Country Music “Country”
National Music “Nation M”
Oldies Music “Oldies”
Folk Music “Folk M”
Documentary “Document”
• Speech and Music include the Program type shown below.
Music: Black character item.
Speech: White character item.
1
Enter PTY mode
Press the [ ] button twice.
2
Select the Program Type
Turn the Control knob.
3
Search for the selected Program Type station
Push the Control knob towards right or left.
4
Exit PTY mode
Press the [ ] button.
⁄
• This function cannot be used during a traffic bulletin or AM
reception.
• When the selected Program Type is not found, “No PTY” is
displayed. Select another Program Type.
Program Type Preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1
Select the Program Type to preset
Refer to <PTY (Program Type)> (page 14) .
2
Enter Program Type Preset mode
Press the [ ] button.
3
Preset the Program Type
Turn the Control knob to select preset number
(“P1” – “P6”), and then press the [ENTER] button
for at least 1 second.
Recalling the preset Program Type
1
Enter PTY mode
Press the [ ] button twice.
2
Enter Program Type Preset mode
Press the [ ] button.
3
Recall the Program Type
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER]
button.
Changing Language for PTY Function
Selecting the Program Type display language as
follows;
Language Display
English “English”
French “French”
German “German”
1
Enter PTY mode
Press the [ ] button twice.
2
Enter Changing Language mode
Press the [ENTER] button.
3
Select the language
Turn the Control knob to select language, and
then press the [ENTER].