Kenwood KDC-5047U - Manual (Page 23)

English | 23
In Standby/ Auxiliary input source
Information Display
Source name “Source Name”
Spectrum analyzer & Clock (AUX only) “Speana/Clock”
Clock (Standby only) “Clock”
Date “Date”
Displays the status (Type A display only) “Indicator”
Blank “Blank”
1
Enter Display control mode
KDC-5047U KMR-440U
Press the [DISP] button.
KDC-BT50U
1) Press the [FNC] button.
2) Turn the Control knob to select
“Display
Control” , and then press the [ENTER] button.
2
Select the Display type
Turn the Control knob to select Display type A
or B, and then press the [ENTER] button.
3
Select Text display selection mode
Turn the Control knob to select “DISP Text
Select” , and then press the [ENTER] button.
4
Select the text display part (Display type A
only)
Push the Control knob towards up or down.
The selected text display part blinks.
5
Select the text
Turn the Control knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• If the selected display item does not have any information,
alternative information is displayed.
• Some items cannot be selected depending on the display
type and row.
• When selecting “Folder name” while playing with iPod,
names will be displayed depending on currently selected
browsing items.
• If the iPod Control by Hand Mode is set to on while playing
the iPod, “iPod By Hand Mode” is displayed.
• If all characters cannot be displayed while playing with iPod,
the file number in the list is displayed.
Information Display
Music title “TITLE***”
Folder name “FLD***”
File name “FILE***”
Function of KDC-BT50U/ KDC-5047U
Illumination Color Selection
Selecting the Illumination Color of the panel.
1
Enter Function setting mode
Press the [FNC] button.
2
Select Color select mode
The item can be selected and determined as
follows.
“Settings” ➜ “DISP & ILLUMI” ➜ “Color SEL”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
3
Select the part where you want to set the
Illumination Color
Part Display
All “All”
Button “Key”
Control knob “Rotary”
USB/ Auxiliary Terminal “USB & AUX”
Turn the Control knob to select part, and then
press the [ENTER] button.
4
Select the Illumination Color
Turn the Control knob to select color, and then
press the [ENTER] button.
Select the color from “Variable Scan”/ “Color1” —
“Color 24”.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.