Kenwood KDC-5047U - Manual (Page 32)

32 |
KDC-BT50U/ KDC-5047U/ KMR-440U
Bluetooth Setup
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)
Function of KCA-BT200 (Optional Accessory)
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2
Enter Function setting mode
Press the [FNC] button.
3
Select Phone Number type edit mode
The item can be selected and determined as
follows.
”Settings” ➜
“Voice Tag” ➜ “PN Type Edit”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4
Enter Phone Number type edit mode
Press the [ENTER] button.
5
Select the category (type) you wish to set
Turn the Control knob to select desired
category name, and then press the [ENTER]
button.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
6
Select a mode
Turn the Control knob.
Display Operation
“Register” Register a voice tag.
“Check”* Play a voice tag.
“Delete”* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
7
Register the category (type) by performing
steps 6 to 7 in <Adding a voice dialing
command> (page 31) .
8
Exit Bluetooth mode
Press the [SRC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag is
not registered for all the categories, the Phonebook may
not be recalled by voice command.