Konica Minolta Vectis 300 - Manual (Page 24)

44 45
DATE IMPRINTING - Setting the Date and Time
1. Turn the camera off, then press the
date button with the button key to
display the date.
2. Press the select button until the item
you want to adjust blinks.
• Each press of the select button causes the next
item to blink. The sequence is:
YY MM DD hh mm
3. Press the adjust button to change the
blinking item.
• Press and hold the adjust button to change
the value rapidly.
4. Repeat steps 2 and 3 until all items in
the date and time display are correct.
5. Press the select button until all items
stop blinking to set the updated
information.
• This camera has a quartz clock and automatic calendar through the year 2029.
stops
blinking