Konica Minolta Vectis 300 - Manual (Page 32)

60 61
REMOTE CONTROL - CONT’D
2. Center your subject in the focus
frame, then press the shutter-release
button partway down until the green
focus lamp glows.
3. Lift your finger from the shutter-
release button, then recompose the
picture.
4. Point the remote toward the front of the camera and
press • or 2s.
• The focus will remain locked until the focus is reset, remote-control
mode is cancelled, or the camera is turned off.
FOCUS HOLD IN REMOTE CONTROL MODE
1. Set the camera to remote control mode.
Continued on following page.