Kicker SX900.4 - Manual (Page 10)

10
SX .4 Series Amplifiers
Installa
tion
STEREO AND BRIDGED SIMULTANEOUSLY
SX.4 series amplifiers are capable of operating into a minimum impedance of 2 ohms per
channel in stereo mode and 4 ohms bridged in mono mode. AMP 1 can be bridged while AMP
2 is in stereo OR AMP 2 can be bridged while AMP 1 is in stereo.
R
   
  


      
  
    
* * k i c k e r
L+
L -
R+
R -
SPEAKER(S)
+
_
GROUND
REMOTE
TURN-ON
BATTERY
+12V FUSE
18"
or less
SIGNAL OUT
AMP 1 IN
AMP 2 IN
L+
L -
R+
R -
+
SPEAKER(S)
RIGHT LEFT
_
+
_
SPEAKER(S)
BRIDGED
These are just a few of the many ways you can use your SX.4 series Kicker amplifier. These
system diagrams are designed to give you a basic understanding of the most common uses for
this amplifier. For more complex systems see the Authorized Kicker Dealer where you made
your purchase.
NOTE: For maximum performance from your Kicker SX .4 amplifier,
we recommend using Genuine Kicker Installation Accessories.
Visit your local dealer or visit www.Kicker.com to learn more.