Kicker SX900.4 - Manual (Page 25)

25
SX .4 Series Amplifiers
Opera
tion
Phase MENU - Here you can switch the polarity of each amplifi-
er’s channel(s) output between 0 or 180 degrees. There are two
PHASE menus, one for AMP 1 and one for AMP 2. This allows
each amplifier to have its own individual PHASE setting.
Use the
UP
and
DOWN
keys to
scroll through AMP-1 and AMP-2 and
press the ENT key to select the
amplifier you want to adjust.
Use the
UP
and
DOWN
keys to
scroll through BOTH , LEFT and right .
Press the
ENT
to select the one you
want to adjust.
Now use the
UP
and
DOWN
keys
to select from 0 DEGREE or
180 DEGREE . Press the
ESC
to
return to the selected amplifier’s
PHASE menu.
When you are done adjusting the
selected amplifier’s phasing, press the
ESC
key again to return to the
PHASE menu AMP-1 / AMP- 2
options to select the other amplifier.
If done adjusting the phasing, press
the
ESC
key again to return to the
MAIN menu.
HOME ENT ESC
HOME ENT ESC
NOTE...
While adjusting the PHASE you will notice the PHASE
indicator on the
ISIS
VFD display is lit. This indicates you are
in the PHASE menu.
The AMP1 or AMP 2 indicator will light up to indicate which
amplifier you are currently adjusting.
There is also a LEFT and a RIGHT indicator that will light up to
let you know which channel (Left and/or Right) that you are
currently adjusting.
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC