Paper tray 1 (front), Paper tray 2 (rear), Paper exit tray – Lexmark Z65n User Manual
Page 17: Front cover, Network link light, Network connection speed light, Ethernet cable connector, 17 printer overview, Lexmark z65 lexmark z65n
17
Use this:
When you want to:
Ethernet cable connector
Connect the printer to a network with an RJ-45 (Category 5)
Ethernet cable.
Front cover
• Install or change print cartridges.
• Clear a paper jam.
Network connection speed
light
See how quickly your network is transmitting data.
• When it flashes, your network is transmitting data at 100
Mbps.
• When it is on, your network is transmitting data at 10 Mbps.
Network link light
See if your network is properly connected (the light is on).
Paper exit tray
Stack paper after printing.
Paper tray 1 (front)
Print on most types and sizes of paper. This tray has a paper type
sensor and should be used as the main paper tray. For more
information, see
. Check the
number icon so you can match it with the appropriate paper tray
button.
Paper tray 2 (rear)
Print on various paper types. The default setting for this paper
tray is for plain paper. This tray does not have a paper type
sensor. Check the number icon so you can match it with the
appropriate paper tray button.