Lexmark Z65n - Manual (Page 53)

47 Printing ideas
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Lexmark Z65
Lexmark Z65n
Using this
Guide...
www.lexmark.com
Printing a banner
Note: Some software applications and some operating systems do not support
banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1 Remove any paper from paper tray 1.
2 Tear off enough pages for the banner including one extra sheet, and then place them
behind the printer.
3 Load the unattached, leading edge of the
first page into the printer with the right side
against paper tray 1.
Note: Forcing the paper too far into
the printer may cause a paper
jam. For help, see
Clearing
paper misfeeds or jams .
4 Squeeze and slide the paper guide to the
left edge of the banner paper.