Lennox International Inc. MPB35ST-NM - Manual (Page 17)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
17
ACCESSORY COMPONENTS
Outside Air Kits Models FOAK-4 and
FOAK-4LD
Outside Air kits are available with duct (FOAK-4)
and without duct (FOAK-4LD) for use if outside
combustion air is required or desired. If model
FOAK-4LD is used it must be used in conjunction
with locally purchased, non-combustible Class
1 or Class 0 fl exible duct.
Polished Brass and Brushed Stainless
Hood Kits
Attractive hoods are available in two styles to
be used on the Multi-Open Series appliances.
These hoods are designed to be fi tted to the glass
viewing sides of the appliance. In addition to
providing an aesthetically pleasing appearance
to your appliance installation, the hood reduces
heat effects to decorative mantles and fi nish
materials located above the fi replace opening.
The hood kit replaces the standard hood that
comes with these appliances and snaps into
place. These kits can be retrofi tted to previously
installed appliances.
* 35" Eyebrow Hood Kits
Cat. No. Model No. Description
96K67 EB35PB
Hood Kit, Polished
Brass
88L49 EB35BS
Hood Kit, Brushed
Stainless
* These hood kits replace the standard hood that
comes with these fi replaces.
(ref. Form #504,142M)
Arch Door Kits
Two types of arch door kits are available for
the Multi-Open Series. Both types of kits are
easy to install and do not require hardware to
attach them to the standard door frame. These
kits can be retrofi tted to previously installed
Multi-Open Series appliances. The decorative
arch kits can not be used in conjunction with
the screen panel kit.
* 35" Arch Door Kits
Cat. No. Model No. Description
26M43 ADK35CMPB Arch Door, Polished Brass
26M44 ADK35CMBS Arch Door, Brushed Stainless
(ref. Form # 750,021M)
Polished Brass and Brushed Stainless
Louvers Kits
Decorative louvers are available for use with all
Multi-Open Series appliances. These louvers
are designed to replace the standard radiant
panels that are provided with the appliance.
These kits include a top 3-piece assembly and
a bottom 3-piece assembly. They provide a
touch of elegance to any Multi-Open Series
appliance. These kits can be retrofi tted to
previously installed appliances.
35" Assembled Louver Kits
Cat. No. Model No. Description
88L28 LVR35PB-2
Louver Kit, Polished
Brass
88L32 LVR35BS-2
Louver Kit, Brushed
Stainless
(ref. Form # 750,119M)
2-Piece Polished Brass and Brushed
Stainless Louvers Kits
These louvers are designed to replace either
the middle charcoal louver of each set or the
charcoal louver in each set closest to the glass
door. These kits include two narrow louvers.
They provide a touch of elegance to these
appliances. These kits can be retrofi tted to
previously installed appliances.
2-Piece Louver Kits
Cat. No. Model No. Description
96L05 2LVR35PB
2 Pc. Louver Kit,
Polished Brass
96L09 2LVR35BS
2 Pc. Louver Kit,
Brushed Stainless
(ref. Form # 504,224M))
(ref. Form # 750,008M)
Outside Combustion Air Kits
Cat. No. Model No. Description
81L87 FOAK-4 Combustion Air Kit (with
duct)
81L88 FOAK-4LD Combustion Air Kit
(without duct)