Lenovo 4304493 - Manual (Page 25)

DOS or Windows 3.11
Attention
Remove any other PC Cards from your computer.
The device driver cannot be installed from a Windows
MS-DOS prompt. You must exit Windows 3.11 before
installing the device driver.
1 Make sure the CD-ROM drive is correctly connected to the PC
Card and that the PC Card is inserted into a PC Card slot on
your computer. Turn on your computer and the CD-ROM
drive.
2 Insert the Option Diskette into the diskette drive.
3 Type A:\INSTALL and press Enter.
4
You will be prompted by the setup program to select one of the
following opton.
Automatic installation
The setup program will automatically install the
required software into your computer.
Selective installation
The setup program installs the required software into
your computer after you specify the following items:
Software installation destination
Installation destination directory name
IRQ number
I/O base address
When you have selected which installation you want, press
Enter.
5
When the installation process is complete, restart your computer.
You can now use the base model CD-ROM drive with DOS or
Windows 3.11, or the stereo model with Windows 3.11.
Installing the Audio Driver (Stereo Model Only)
Note
Before installing the stereo model audio device driver, delete
any other sound function previously installed under DOS or
Windows.
The stereo model sound functions do not work in DOS.
The game port on the CD-ROM drive is incompatible with
both DOS and Windows 3.11.
2-14 20X Max Portable CD-ROM Drive