Lennox Hearth BT2010 - Manual (Page 9)


9. How to...
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset. If your phone
does not support this function, tap on the answer/end button on the
Jabra BT2010 to receive the call in the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an in-
coming call. Depending on your phone settings, the person who called
you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialing*
• Press the answer/end button. For best results, record the voice-dialling
tag through your headset if your phone allows you to do so. Please
consult your phone’s user manual for more information about using
this feature.
Redial last number*
• Double tap the answer/end button.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume.
Mute/Unmute
• Press the volume up and down (+ or -) at the same time to mute the call
(the caller will not hear your voice. To unmute, press either the volume
up or volume down button.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.