Liebert 2U - Manual (Page 10)

6
RACK MOUNT INSTALLATION
1. Rack mount installation of the 2U POD is possible with the use of the rack mounting
brackets (shipped with the POD). See Figure 6.
2. The rack mount brackets allow you to rack mount the POD in a 19" enclosure (23" to 19"
rack adapters would have to purchased separately if you are using our 23" Foundation or
equivalent cabinet).
3. The POD can be mounted to face one of four directions depending on your application, and
utilizing the rack mount brackets provided.
4. Determine the desired position and direction for the POD, face it in that direction, then
attach the brackets to the POD with the screws provided.
5. Consult your rack/enclosure manufacturer’s recommendations for specific rack mounting
hardware that will be required.
6. The holes on the rack mount bracket are notched for easy installation. Tighten the POD
securely to the rails and then follow the startup directions for the POD in the previous
section, Installation on GXT 2U UPS.
Figure 6 2U POD with rack mounting brackets
MAINS
B A
UPS
UPS
AVAILABLE
UPS MAINS
CONNECT UPS LINE CORD HERE
MAINTENANCE BYPASS
AVAILABLE
CIRCUIT BREAKER
16A 250V-/T 10A 10A 10A
CAUTION
IF MAINS LAMP IS ILLUMINATED
MAINTENANCE BYPASS POSITION
MAY BE SELECTED.
SWITCH TO UPS POSITION ONLY
WHEN UPS LAMP IS ILLUMINATED.
A+B MAX. 16A
Rack mounting brackets