Liebert 2U - Manual (Page 5)

1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
operation of the 2U POD ™ .
This product is designed for commercial / industrial use only, with Liebert UPS systems. It is
not intended for use with life support and other designated “critical” devices. Do not exceed
POD or UPS rating labels.
Read all safety and operating instructions before operating the 2U POD
™ and the connected
UPS system. Adhere to all warnings on the unit and in this manual. Follow all operating and
user instructions.
Turn the UPS off and unplug the 2U POD
™ before cleaning. Use only a soft cloth, never liquid
or aerosol cleaners.
The UPS and 2U POD
™ are designed for data processing equipment. Do not plug laser print-
ers or appliances, such as hair dryers, heaters, vacuum cleaners, or electric drills, into the UPS
output sockets.
The UPS and the 2U POD ™ are equipped with earthed plugs (plug types vary depending on
model). Do not defeat the safety purpose of this plug. If unable to fully insert the plug into the
designated socket, contact a qualified electrician or your local dealer or Liebert representative
for assistance.
Route power supply cords so they are not walked on or pinched in anyway.
!
WARNING
DO NOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF. OPENING OR
REMOVING THE COVER MAY EXPOSE YOU TO DANGEROUS VOLTAGES,
EVEN WHEN THE AC CORD IS DISCONNECTED FROM THE ELECTRICAL
SOCKET. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
WARNING
DO NOT MODIFY THE CABLES IN ANY WAY. THE POD SOCKETS SHOULD
MATCH THE UPS SOCKETS. CONSULT YOUR DEALER IF THE AC CORDS
DO NOT MATCH THE MAINS SOCKET. THE 2U POD ™ MUST BE EARTHED
AT ALL TIMES WHILE IN USE. TURN OFF THE UPS BEFORE
UNPLUGGING IT.
!
CAUTION
Risk of electric shock, do not remove cover, no user serviceable parts inside.
Refer servicing to qualified service personnel.
!
CAUTION
This device receives power from multiple sources. Before servicing this
device, remove all connections. Before servicing the UPS, follow
“Maintenance of UPS” instructions in the user manual for your UPS.
!
CAUTION
For use in a controlled environment. Refer to manual specifications for
environmental conditions.
!
WARNING
WHEN THE 2U POD
™ IS IN MAINS POSITION (MAINTENANCE BYPASS
MODE) THE POWER TO THE CONNECTED LOAD IS NOT FILTERED OR
CONDITIONED BY THE UPS. THE LIEBERT UPS CONNECTED EQUIPMENT
GUARANTEE IS NOT VALID WHILE IN THIS MODE OF OPERATION.