LG 3803 - Manual (Page 42)

8. GPIB
Since this instrument provides the GPIB (IEEE 488) connector as standard, major functions
can be remotely controlled via the GPIB interface.
Note
The GPIB capability of this instrument is confirmed by using the GPIB board (PCI-GPIB,
PCMCIA-GPIB) manufactured by National Instruments Corporation (NI). If other than
the board mentioned above is used, operation may differ from the instructions in this
manual. Therefore, the board mentioned above should be used when controlling this
instrument.
8.1 Specifications
Standard Conforms to ANSI/IEEE Std 488.1-1978
LSI Used TMS9914A or equivalent
Code ASCII
8.2 Interface Function
Table 8-1 Interface function
Function Subset Description
Source Handshake SH1 All functions
Acceptor Handshake AH1 All functions
Talker T8 Basic talker function, canceling talker
specified by listener
Listener L4 Basic listener function, canceling listener
specified by MTA
Service Request SR0 No function
Remote/Local RL2 No LLO function
Parallel Poll PP0 No function
Device clear DC1 All function
Device trigger DT0 No function
Control C0 No function
E1 Open collector driver is used.
State driver is used for EOI and DAV,
however.
8-1